Easy Homemade Peanut Brittle Recipe | A Spicy Perspective (2024)

FAQs

Why didn't my homemade peanut brittle get hard? ›

The main reason why peanut brittle doesn't get hard and have the crunch we expect is because the sugar was not cooked long enough. The sugar needs to be cooked to what is called the hard crack stage, 300ºF.

Be sure to use a candy thermometer to ensure it reaches 300 degrees F or hard crack stage. What does baking soda do to peanut brittle? Adding a little baking soda aerates the peanut brittle causing it to expand slightly for a crunchy texture that won't break your teeth when you chew it.

Heavy 6 quart Dutch Oven pot. Mine is an old 1970's Club Aluminum. It's perfect! You need a heavy THICK pot so it won't scorch.

Whether it's during the cooking, cooling, or storage process, moisture and humidity can ruin the best batch of brittle in minutes, leaving you with a soggy, sticky mess. This is why eliminating moisture anywhere you can is our top tip on how to store peanut brittle.

The candy will attract moisture from the air, making it unpleasantly sticky instead of shatteringly crisp. Once it's completely cool, transfer it to an airtight container.

It is important to coat cookie sheets with butter and put in the freezer to get them really cold before you need to pour the brittle. After you pour the candy you should put the pans in the fridge or outside if it is cold, so the brittle will set up quickly and stay fluffy.

Why is it too hard? Using baking soda usually prevents peanut brittle from being too, well, brittle. However, if you cook the candy past the set temperature or overwork the candy once you spread it out onto the cookie sheet, that can cause it to become very hard and difficult to bite through.

Examples of interfering agents include corn syrup and cream of tartar. A key step in making brittle is heating the syrup to the proper temperature. Typically, this is the hard crack stage or 300° to 310°F.

Peanut brittle turning white, often referred to as "sugaring," is typically the result of crystallization of the sugar in the candy. This crystallization can make the brittle appear white or cloudy rather than having a clear, glass-like consistency.

Reviving stale peanut brittle is possible to some extent. You can try placing the stale peanut brittle on a baking sheet and gently heating it in an oven at a low temperature, around 250°F (120°C), for a few minutes. This can help to soften it a bit and restore some of its original texture.

Can I use aluminum foil instead of parchment paper for peanut brittle? ›

Line a large baking sheet with parchment paper or aluminum foil lightly coated with vegetable cooking spray. Place the pan on a heat-proof trivet or cooling rack and set aside.

Absolutely! If you want to extend the life of your peanut brittle, you can freeze it. But, make sure it is completely cooled, as moisture is an enemy of peanut brittle. Ensure the brittle pieces are separated by parchment paper to prevent them from sticking together.

To store: Store peanut brittle (once it's completely cooled) in an airtight container at room temperature. Do not refrigerate as the moisture from the fridge will cause the brittle to soften. Store for 6-8 weeks. To freeze: Peanut brittle can be frozen and stored up to 3 months.

You will want the cookie sheet to be non-stick. Use parchment paper, a silicone baking sheet or a greased cookie sheet. Spread the peanut brittle as thin as you can. Immediately add your sea salt.

So, I Googled Salvaging Undercooked Peanut Brittle and followed Tiffany's helpful instructions to throw the pieces back in the pan, turn the heat up and stir, stir, and stir to a raging boil and wait to pour it in the pan until it reaches 300 degrees.

- Preheat your oven to a low temperature, around 250°F (120°C). - Break the stale peanut brittle into smaller pieces. - Place the brittle pieces on a baking sheet in a single layer. - Heat the brittle in the oven for about 5 to 10 minutes, checking frequently to avoid overcooking.

What Makes it Brittle? The sugar will be cooked to 300ºF (149ºC)—hard crack stage; which when set up would be hard like a lollipop. But peanut brittle is delicate and you can easily bite into it—how? The secret is in the baking soda.

Don't try to spread the candy once it's on the baking sheet as it starts hardening almost immediately and spreading it doesn't work well. Let the peanut brittle cool for 30 minutes, then break it into pieces. Store it in an airtight container at room temperature for up to two months.